Victron Phoenix 800VA Pure Sine Inverter With VE.Direct
Victron Phoenix 800VA Pure Sine Inverter With VE.Direct
The Victron Energy Phoenix-series inverters are competitively priced yet efficient and built to last. One of the specifications we're asked about on smaller inverters is the no-load power consumption, and this is one of the areas where the Victron Phoenix really shines, with about half the consumption of the closest competition. A search mode lowers it even more, to an amazing 0.8 to 1.0 watts. That's just one example of the engineering that has gone into these quality inverters.
If you really need to rely on your inverter, or you're just tired of tossing your budget models in the trash every few years, we highly recommend these.
VE.Direct communication port can be connected to:
• A computer (VE.Direct to USB interface cable needed)
• Apple and Android smartphones, tablets, MacBooks and other devices (VE.Direct Bluetooth Smart Dongle needed)
Fully configurable:
• Low battery voltage alarm trip and reset levels
• Low battery voltage cut-off and restart levels
• Dynamic cut-off: load dependent cut-off level
• ECO mode on/off and ECO mode sense level
Monitoring:
• Input and output voltage, % load, and alarms
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools.
ECO mode When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. Once in standby the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a preset level, the inverter will remain on.
Remote on/off A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
Built-in protection
All models feature low battery voltage, high battery voltage, high temperature, overload, and short circuit protection.
Reliability
All Victron products (except batteries) come with a 5 year worldwide warranty, supported by an international network of service points and dealers.
Phoenix Inverter Model |
12/250 |
12/375 24/375 48/375 |
12/500 24/500 48/500 |
12/800 24/800 48/800 |
Model #: (12V Models) | PIN122510500 | PIN123750500 | PIN125010500 | PIN0128010500 |
Continuous power at 25°C | 250 VA | 375 VA | 500 VA | 800 VA |
Continuous power at 25°C / 40°C | 200 / 175W | 300 / 260W | 400 / 350W | 650 / 560W |
Peak power | 400W | 700W | 900W | 1500W |
Output AC | 230VAC or 120VAC +/- 3% 50Hz or 60Hz +/- 0.1% | |||
Input Voltage Range | 9.2 - 17 / 18.4 - 34.0 / 36.8 - 62.0V | |||
DC low shut down (adjustable) | 9.3 / 18.6 / 37.2V | |||
DC low restart and alarm (adjustable) | 10.9 / 21.8 / 43.6V | |||
Battery charged detect (adjustable) | 14.0 / 28.0 / 56.0V | |||
Maximum efficiency | 87 / 88 / 88% | 88 / 89 / 90% | 90 / 90 / 91% | 90 / 90 / 91% |
Zero load power | 4.2 / 5.2 / 7.9W | 5.6 / 6.1 / 8.5W | 6 / 6.5 / 9W | 6.5 / 7 / 9.5W |
Default zero-load power in ECO mode | 0.8 / 1.3 / 2.5W | 0.9 / 1.4 / 2.6W | 1 / 1.5 / 3.0W | 1 / 1.5 / 3.0W |
Battery connection | Screw Terminals | |||
Maximum cable cross-section | 10 mm² / AWG8 | 10 mm² / AWG8 | 10 mm² / AWG8 | 25 mm² / AWG4 |
Weight | 2.4 kg / 5.3 lb | 3.0 kg / 6.6 lb | 3.9 kg / 8.5 lb | 5.5 kg / 12 lb |
Dimensions (hxwxd, mm) (hxwxd, inch) |
86 x 165 x 260 mm 3.4 x 6.5 x 10.2 inch |
86 x 165 x 260 mm 3.4 x 6.5 x 10.2 inch |
86 x 172 x 275 mm 3.4 x 6.8 x 10.8 inch |
105 x 216 x 305 mm 4.1 x 8.5 x 12.1 inch (12V model: 105 x 230 x 325 mm) |