Victron Cyrix-I High-Current Battery Combiners
Victron Cyrix-I High-Current Battery Combiners
No voltage loss
The Victron Energy Cyrix-i Battery Combiner is a microprocessor-controlled heavy-duty relay that automatically connects batteries in parallel when one battery has reached a preset voltage (indicating that the battery is being charged), and disconnects when the voltage decreases below float level (indicating that one or both batteries are being discharged). Cyrix battery combiners are an excellent replacement for diode isolators, the main advantage being that there is virtually no voltage loss. In addition, four switch timing profiles can be chosen.
Prioritising the starter battery
In a typical setup the alternator is directly connected to the starter battery. The accessory battery, and possibly also a bow thruster and other batteries are each connected to the starter battery by Cyrix battery combiners. When a Cyrix senses that the starter battery has reached its connect voltage it will engage, to allow for parallel charging of the other batteries.
Bidirectional voltage sensing
The Cyrix senses the voltage of both connected batteries. It will therefore also engage if for example the accessory battery is being charged by a battery charger.
Intelligent battery monitoring to prevent repeated switching
The software of the Cyrix-i 400 does more than simply connect and disconnect based on battery voltage and with a fixed time delay. The Cyrix-i looks at the general trend (voltage increasing or decreasing) and reverses a previous action only if the trend has reversed during a certain period of time. The time delay depends on the voltage deviation from the trend. Four different connect/disconnect profiles can be selected to suit requirements.
12/24 Volt or 24/48 Volt auto ranging
The Cyrix-i 12/24 will automatically adjust to a 12V or 24V system and the Cyrix-i 24/48 will adjust to a 24V or 48V system. 36V systems, mixed-voltage systems, or off-common-nominal voltage systems, are not supported.
Reliability
All Victron Energy products (except batteries) come with a 5 year worldwide warranty, supported by an international network of service points and dealers.
Continuous current | 400 Amps |
Peak current | 2000 Amps / 1 sec |
Current consumption when open | 4 mA |
Emergency start | Yes, 30s |
Microswitch for remote monitoring | Yes |
Status indication | Bi-color LED |