Sterling Power Alternator-To-Battery Chargers

The Sterling Power Alternator-to-Battery Charger can transform the output of your alternator(s) into the same sophisticated 4-step charging performance that you would expect from a shore-side charger. By monitoring and then controlling the voltage level of the alternator connected to the input side, the Alt-to-Bat is able to provide a full multi-stage charge rate that recovers your house battery bank five times faster than using a standard alternator.

This device does not modify the actual charging system in any way, and so does not affect the vehicle/vessel's electronic control systems (if fitted) or void any warranties. It is also easy to install, fitting between the alternator and the batteries, much as an isolator would.

As with any high-current electrical device, professional installation is strongly recommended.

• 4-stage battery charging profile extends the life of your batteries by ensuring a full charge & conditioning, as well as entering a float mode when charging is complete to protect against overcharging your batteries.
• Monitors and ensures starting battery is not overcharged and is at proper charging voltage while providing maximum available charge in a 4-step charging profile to the auxiliary bank of batteries.
• By lowering the voltage of your alternator, this product can draw near full current capacity from your alternator, and then boost the voltage output in a multi-stage charging profile.
• Charges GEL, AGM, FLA, and Calcium batteries.
• Ability to mix onboard battery types.
• Easy to install, wired in place of a standard alternator to battery isolator. No modification of alternator is required. Installation requires no modification to the primary electrical system, resulting in no vehicle warranty issues.
• Battery and Alternator temperature sensing standard when the temperature sensors included w/ product are used.
• Please be aware that this unit is not current-limiting; the unit should be sized according to the alternator output. If current-limiting is required for your installation, please use a Battery-to-Battery charger instead.